Do you have a question about the Singer or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Singer owners to properly answer your question. View the manual for the Singer here, for free.
This manual comes under the category Sewing machines and has been rated by 7 people with an average of a 8. This manual is available in the following languages: English. Is your question not listed? Home Sewing machines Singer Singer manual. Manuel d'Instruction. Measure diameter and thickness of button and add 0.
Place fabric under the foot, so that marking on the buttonhole foot aligns with starting marking on fabric. Dial selector on " ". Change to zipper foot. Set stitch length control between "1" - "4" according to thickness of fabric.
The zipper foot can be attached right or left, depending on which side of the foot you are going to sew. Set the stitch pattern dial to " ". Place patch in position. The stitch length can be shortened to produce very close stitches.
Install the darning plate. The lever a should be behind the needle clamp screw b. Page Practical Stitches Practical stitches Set the machine as illustrated. Turn the stitch length dial to suit the fabric and application. Shell stitch A For decorative edges. Suitable for edges on sheer, fine and stretch fabrics.
The larger stitch should go just over the edge of the fabric to create the shell effect. Page Applique And Blindstitch Applique Applique and blindstitch applique Position applique piece on background fabric. Align needle so that it pierces background fabric along the outside edge if the applique. Lower presser foot.
If using a blindhem foot, align the lip of the blindhem foot guide so that it sits directly under the edge of the applique. Page Quilting Functions Quilting functions Stippling is free motion quilting where you hoop the fabric and guide it by hand, allowing you to stitch in any direction. For template quilting transfer a design from a template plastic stencil to your fabric and then stitch following the outline. Do not forget to lower the presser bar if you are sewing without a foot. Align the center of the foot with the center of the tear.
Stitchacross, backstitching at the start and at the end of the seam. Align needle so that it pierces background fabric along the outside edge of the applique. Page Traditional Pintucks Traditional pintucks Machine Preparation: - Pattern: Straight - Stitch Width: Straight - Stitch Length: 2 - 3 Sewing Instructions: To mark pintucks in your fabric, either pull a thread to mark the fold or mark with chalk or marking pencil.
Fold and press wrong sides together on pulled thread line or marked lines. Use as a decorative touch on jackets and other sewing projects. Page Maintenance Maintenance Attention: Disconnect the machine from the electrical supply by removing the plug from the main socket. When cleaning the machine, it must always be disconnected from the electrical supply.
Remove the needle plate: Turn the handwheel until the needle is fully raised. Open the hinged front cover and unscrew the needle plate screws with the screw driver 1. The machine is not threaded correctly. Rethread the machine. The thread tension is too tight. Reduce the thread tension. The thread is too thick for the needle. Select a larger needle. The needle is not inserted correctly.
Print page 1 Print document 43 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Always unplug sewing machine from the electrical outlet when. Never drop or insert any object into any opening. Do not use outdoors. Do not operate where aerosol spray products are being used or. To disconnect, turn all controls to the off "O" position, then. Do not unplug by pulling on cord. To unplug, grasp the plug, not. The sound pressure level under normal operating conditions is.
This sewing machine is intended for household use only. Please turn off the machine or unplug when the machine is not. Never place anything on the foot controller. If the supply cord that fixed with foot controller is damaged, it must.
0コメント